List of area moments of inertia

The following is list of area moments of inertia. The area moment of inertia or second moment of area has a unit of dimension length⁴, and should not be confused with the mass moment of inertia. If the piece is thin, however, the mass moment of inertia equals the areal density times the area moment of inertia. Each is with respect to a horizontal axis through the centroid of the given shape, unless otherwise specified.

Description	Area moment of inertia	Comment	Reference
a filled circular area of radius r	$I_0 = \frac{\pi (2r)^4}{64}$ or $I_0 = \frac{\pi (r)^4}{4}$		^[1]
an annulus of inner radiusr₁ and outer radiusr₂	$I_0 = \frac{\pi}{4} \left({r_2}^4-{r_1}^4\right)$	For thin tubes, this is approximately equal to: $\pi \left(\frac{{r_2}%2B{r_1}}{2}\right)^3 \left({r_2}-{r_1}\right)$ or $\pi {r}^3{t}$ .
a filled circular sector of angle θ in radians and radius r with respect to an axis through the centroid of the sector and the centre of the circle	$I_0 = \left(\theta -\sin\theta\right)\frac{r^4}{8}$
a filled semicircle with radius r with respect to a horizontal line passing through the centroid of the area	$I_0 = \left(\frac{\pi}{8} - \frac{8}{9\pi}\right)r^4 \approx 0.1098r^4$		^[2]
a filled semicircle as above but with respect to an axis collinear with the base	$I = \frac{\pi r^4}{8}$	This is a consequence of the parallel axis theorem and the fact that the distance between these two axes is $\frac{4r}{3\pi}$	^[2]
a filled semicircle as above but with respect to a vertical axis through the centroid	$I_0 = \frac{\pi r^4}{8}$		^[2]
a filled quarter circle with radius r entirely in the 1st quadrant of the Cartesian coordinate system	$I = \frac{\pi r^4}{16}$		^[3]
a filled quarter circle as above but with respect to a horizontal or vertical axis through the centroid	$I_0 = \left(\frac{\pi}{16}-\frac{4}{9\pi}\right)r^4$	This is a consequence of the parallel axis theorem and the fact that the distance between these two axes is $\frac{4r}{3\pi}$	^[3]
a filled ellipse whose radius along the x-axis is a and whose radius along the y-axis is b	$I_0 = \frac{\pi}{4} ab^3$
a filled rectangular area with a base width of b and height h	$I_0 = \frac{bh^3}{12}$		^[4]
a filled rectangular area as above but with respect to an axis collinear with the base	$I = \frac{bh^3}{3}$	This is a result from the parallel axis theorem	^[4]
a filled rectangular area as above but with respect to an axis collinear, where r is the perpendicular distance from the centroid of the rectangle to the axis of interest	$I = \frac{bh^3}{12}%2Bbhr^2$	This is a result from the parallel axis theorem	^[4]
a filled triangular area with a base width of b and height h with respect to an axis through the centroid	$I_0 = \frac{bh^3}{36}$		^[5]
a filled triangular area as above but with respect to an axis collinear with the base	$I = \frac{bh^3}{12}$	This is a consequence of the parallel axis theorem	^[5]
a filled regular hexagon with a side length of a	$I_0 = \frac{5\sqrt{3}}{16}a^4$	The result is valid for both a horizontal and a vertical axis through the centroid, and therefore is also valid for an axis with arbitrary direction that passes through the origin.